S3 MINI PRO Board Overview

The main development board used throughout the course is the WEMOS S3 MINI PRO.

It is a compact development board based on the ESP32-S3FH4R2 microcontroller and combines the ESP32-S3 with several onboard devices.

1. Main Features

The S3 MINI PRO includes:

    • ESP32-S3FH4R2 microcontroller

    • 2.4 GHz Wi-Fi

    • Bluetooth Low Energy

    • 4 MB Flash

    • 2 MB PSRAM

    • 0.85-inch 128 × 128 TFT display

    • ST7789 or GC9A01 display variants

    • 12 digital I/O pins

    • 3 onboard push buttons

    • 1 onboard RGB LED

    • 1 onboard infrared LED

    • ADC

    • DAC

    • I²C

    • SPI

    • UART

    • USB OTG

    • Arduino support

    • ESP-IDF support


2. Technical Specifications

Specification Value
Microcontroller ESP32-S3FH4R2
Operating Voltage 3.3 V
Clock Speed Up to 240 MHz
Flash 4 MB
PSRAM 2 MB
Digital I/O 12
Display 0.85-inch TFT
Display Resolution 128 × 128 pixels
IMU QMI8658C 6D MEMS IMU
Wireless 2.4 GHz Wi-Fi + Bluetooth LE
Size 34.3 × 25.4 mm
Weight Approximately 5 g


3. Onboard Devices

Push Buttons

Button GPIO
Button 1 GPIO0
Button 2 GPIO47
Button 3 GPIO48

RGB LED

Function GPIO
RGB LED Data GPIO8
RGB LED Power GPIO7

Infrared LED

GPIO9

QMI8658C IMU

The IMU combines:



    • 3-axis accelerometer

    • 3-axis gyroscope

TFT Display

The course board uses the ST7789 variant.

Display Function GPIO
Backlight GPIO33
Reset GPIO34
Chip Select GPIO35
Data/Command GPIO36
MOSI GPIO38
SCK GPIO40

4. Communication Interfaces

Interface Typical Use
GPIO LEDs, buttons and simple digital devices
SPI TFT display
I²C Sensors such as the IMU
UART Serial communication
USB Programming and communication
PWM LED brightness and signal generation


5. ESP32-S3 Microcontroller

The ESP32-S3 provides the processing capability required to:



    • Read digital inputs

    • Control outputs

    • Communicate with sensors

    • Drive the TFT display

    • Use Wi-Fi and Bluetooth

    • Run interactive applications

    • Combine multiple devices in a single project


6. Board Variants

WEMOS MicroPython board definitions include:

LOLIN_S3_MINI_PRO_ST7789
LOLIN_S3_MINI_PRO_GC9A01

The course board uses:

LOLIN_S3_MINI_PRO_ST7789


7. Course Approach

Understand the Board
│
▼
Study Individual Devices
│
├── LEDs
├── Buttons
├── Display
├── IMU
└── Other Peripherals
│
▼
Understand the Drivers
│
▼
Complete Exercises
│
▼
Modify the Examples
│
▼
Combine Multiple Devices
│
▼
Larger Applications
Topic revision: r1 - 19 Nov 2026, JamesInkoom