The BMP180 Temperature and Atmospheric Pressure Sensor

The BMP180 is a sensor that measures temperature to 0.1 \xB0C precision and barometric (atmospheric air) pressure to 1 Pa precision. The device has been designed by Bosch Sensortec and comes with an I2C interface. The data sheet with a complete description of the chip and how it can be programmed can be found here. In addition to the sensors themselves the device features a 176 bit EEPROM containing individual calibration parameters for each device.

front view BMP180	back view BMP180

I connected SDA, SCL, GND and VDD to its corresponding pins on the Raspberry Pi and left VDDIO unconnected.

Bosch Sensortec provides a BMP180 driver, which must however be adapted to the I2C interface library used by the controller (in our case I used pigpio accessed through the pigpiod daemon). The sources (https://iotworkshop.africa/pub/Embedded_Systems/BMP180/bmp180lib.tar.gz ) of the library and the include file to be used by clients of the library is attached.

,- %USERSIG{UliRaich - 2017-02-01}%

Comments

- %USERSIG{UliRaich - 2017-02-01}%

Comments