The PS2 game controller

The PS2 game controller can be used to remotely control our robot cars, robotic arms or other devices. There is a project showing how this can be done for an Arduino.

We need to find out, however, how to connect the receiving module to the ESP32 and a driver is needed to receive the commands from the command unit.

Here is the pinout:

PS2 receiver unit	!WeMos D1 Pins	GPIO
Data (controller to PS)	D7 (MOSI)	23
Command (PS to controller)	D6 (MISO)	19
Vibration Motor (nc)	nc
Ground	GND
Power (3.3V)	3.3V
Attention	D8 (SPI CS)	5
Clock	D5 (SPI CLK)	18
nc	nc
Acknowledge	D0	26

-- %USERSIG{UliRaich - 2022-11-02}%

Comments