https://github.com/uraich/MicroPython_IoTDemos/blob/master/drivers/buzzer/songs.py

rtttl.py and songs.py must be uploaded into the lib directory on the WeMos CPU flash with uPyCraft before being able to run espBuzzer.py. espBuzzer.py plays the Entertainer tune but you easily select another tune by changing a line in the source code.

The cayenne version of the buzzer program:

https://github.com/uraich/MicroPython_IoTDemos/blob/master/cayenne/buzzer/cayenneBuzzer.py

connects to Cayenne and waits for a song number to be played. Since Cayenne only knows 2 control widgets: the push button and the slider, using the Cayenne GUI is not that convenient for the selection of songs. I therefore wrote a QT application, connecting to Cayenne and publishing the song number for the cayenneBuzzer.py program.

Here is the code:

https://github.com/uraich/MicroPython_IoTDemos/tree/master/PC/cayenneBuzzer

and this is how the GUI looks like:

You first select the tune you want to hear. Pushing the "Play tune" button will send the number of the tune in the list to the Cayenne MQTT broker, which will pass it on to the cayenneBuzzer.py program to play it.

The Hardware

The software

The buzzer needs a frequency passed to it through a GPIO line (by default the upper solder pair blobs connected corresponding to D5 or GPIO 14. To test the device I wrote a very simple micro Python script sending a 500 Hz square wave to it. This can easily be done through the micro Python PWM class.

Here is the code:

https://iotworkshop.africa/pub/AFNOG/BuzzerShield/firstTest.py.txt

Dave Hylands has written some micro Python buzzer scripts to play ringtone melodies defined in the RTTTL (Ring Tone Text Transfer Language). These scripts are written for the PyBoard and must be modified to run on the WeMos D1 mini which use the ESP8266 CPU. I found another problem in the ESp8266 PWM driver code for micro Python, limiting the maximum frequency to 1 Khz, too low to play the tunes correctly. It turns out however that the driver can run at frequencies up to ~ 2 kHz and simply modifying the limit to 2 kHz solved the problem. Of course micro Python must be recompiled and re-flashed to enable these higher frequencies.

And here are the scripts playing the ringtones: esp8266Buzzer is the main program relying on the RTTTL class defined in rtttl.py and the songs on RTTTL format defined in songs.py:

https://iotworkshop.africa/pub/AFNOG/BuzzerShield/esp8266Buzzer.py.txt

https://iotworkshop.africa/pub/AFNOG/BuzzerShield/rtttl.py.txt

https://iotworkshop.africa/pub/AFNOG/BuzzerShield/songs.py.txt

The Buzzer shield

The buzzer shield implements a passive buzzer with frequencies of 1 kHz - 3 kHz. By default it uses data line D5 corresponding to GPIO 14 but can be configured to a different GPIO line.

-- Uli Raich - 2019-03-22

Comments

<--/commentPlugin-->