Be careful: The WS2812B is extremely bright, and you may even damage your eyes when looking straight into the LED, set to maximum brightness. I therefore recommend not to set brightness values higher than 32.

from machine import Pin
from neopixel import NeoPixel

NO_OF_LEDS = 7
pin = Pin(26,Pin.OUT)         # GPIO 26 is used for communication with the WS2812B
ws2812b = NeoPixel(pin,NO_OF_LEDS)
ws2812b[0] = (32,0,0)         # Only the red color component is set. The LED number zero will light up in red
ws2812b.write()               # write the color to the LED

We will terminate the workshop with a small project

The rgb LED chain

The LED employed on the LoLin RGB LED card is very different from the one we used on the CPU card. In fact, the card uses cascadable, addressable WS2812B color LED. rgb stands for red, blue, green. There are 3 very small colored LEDs with red, green and blue colors and by modifying the intensity of each LED different colors can be created. If all color components have the same intensity, the color observed will be white. If you want to know the details of how the WS282B works, here is its datasheet.

Communicating with the WS2812B can be quite complex because the communication timing must be strictly respected. Fortunately, the authors of MicroPython supply a driver which make usage of the WS2812B a child's game.

This is how the board looks like:

-- Uli Raich - 2022-10-16

Comments

<--/commentPlugin-->