Difference: MoreSensors (4 vs. 5)

Revision 52017-02-14 - uli

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Additional Sensors

Line: 15 to 15
 
  • The DS1307 Real Time Clock combined with the AT24c32 serial EEPROM
  • The BMP180 Temperature and Barometric Pressure sensor
  • The HD44780 LCD controller with a 2 x 16 character display and a PCF8574 8bit I/O expander for the I2C bus
Added:
>
>
  The Raspberry Pi uses I2C bus 1 for communication with external I2C devices. This can be seen in the /dev directory. Both libraries: wiringpi and pigpio provide access functions to drive the I2C bus. The i2cdetect command allows to see which I2C addresses are in use. The screen dump below shows 2 devices connected to the I2C bus on address 0x3f ( the pcf8574 I/O expander used to driver the hd44780 display driver) and 0x48 (the pcf8591 A/D and D/A chip).
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback