Difference: TCS3200 (6 vs. 7)

Revision 72022-05-29 - UliRaich

Line: 1 to 1

META TOPICPARENT	name="WebHome"

TCS3200 Color Sensor

Introduction

Line: 32 to 32

This means that with a setting of 2% the frequency is divided by a factor 50.

The LED control line allows switching the illumination LEDs on and off.

Added:

>
>

Cabling

The following table shows the cabling of the TCS3200 (the model on the left photo)

TCS3200	!WeMos bus	GPIO
S0	D3	17*
S1	D4	16*
S2	D8	05
S3	D5	18
OUT	D6	19
LED	D7	23
OE	put to GND on the module
Vcc	3.3V
GND	GND

* GPIO 16 and 17 cannot be used on the LilyG0 T7 V1.4. Because of this, S0 can be jumpered to GND and S1 to +3.3V via a 5K resistor, resulting in fixed frequency scaling of 2%.

Understanding the module and developing a driver for it

The software is available on github: https://github.com/uraich/TCS3200-MicroPython

View topic | History: r9 < r8 < r7 < r6 | More topic actions...