Difference: GUI (2 vs. 3)

Revision 32021-02-06 - UliRaich

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Graphical User Interface on the IoT node

Introduction

The 2.4 " display has a pixel resolution of 320x240 pixels. It is controlled by an ili9431 display driver and provides a touch screen based on the xpt2046 controller. Information about the display and its pin-outs can be found at https://docs.wemos.cc/en/latest/d1_mini_shield/tft_2_4.html.

Changed:
<
<
With a high resolution screen and a touch screen the display can be used to provide a local Graphical User Interface (GUI) for your IoT project.
>
>
With a high resolution screen and a touch screen the display can be used to provide a local Graphical User Interface (GUI) for your IoT project.
 

Hardware preparation

The Lolin 2.4" display uses the following pinout:

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback