Tags:
create new tag
view all tags

Recent Changes in AFNOG Web retrieved at 22:08 (GMT)

A simple push button switch The simplest WeMosD1 shield is just features a single push button. It uses the WeMos` ESP8266 D3 pin which corresponds to GPIO 0. Testing...
Setting up and IoT Session 4: Sending real measurement data to Cayenne and receiving commands and executing them on the hardware Uli Raich formally CERN, Geneva, Switzerland...
Installing the picoweb server The description of picoweb on its git repository explains it as follows: picoweb is a `micro` web micro framework (thus, `pico framework...
The OLED shield This shield features a 64x48 pixel OLED display. We would normally not connect it as IoT sensor but it comes it handy to display the state of out WeMos...
Setting up an IoT Session 3: MQTT and Cayenne Uli RaichFormally CERN, Geneva, Switzerland The Network Layers The WeMos D1 mini has a built in WiFi interfaceIn order...
Title Comments
The LED matrix shield This shield provides a 8x8 led matrix where each led can be individually be switched on and off and its intensity be controlled. The program...
The Raspberry Pi as an IoT node Running Cayenne on the Raspberry Pi is certainly the simplest way to get your sensors connected to Cayenne. All you need to do is downloading...
Using the Atmel AVR Arduino as IoT node Introduction Together with the Raspberry Pi the Arduino is one of the most popular platform in embedded systems. The family...
Sensors for IoT devices ...
Introduction to Internet of Things (IoT) Session 1: Introduction to IoT and Python Isaac Armah Mensah University of Cape Coast, Ghana Introduction of Lecturers...
A WEB cam in MicroPython Introduction In order to provide a WEB cam in MicroPython we need The camera hardware with enough RAM memory to store the camera images...
Installing the picoweb server The description of picoweb on its git repository explains it as follows: picoweb is a `micro` web micro framework (thus, `pico framework...
Hardware Options Introduction The virtual world example consists of 2 distinct parts The sensor part and its readout which is implemented on a micro controller...
Setting up and IoT Session 2: Micropython andHardware accessUli RaichFormally CERN, Geneva, Switzerland The WeMos D1 mini CPU card ESP8266 cost: 2....
Exercises Session on Python Session on Sensor and Actuator Access Session on the Virtual World Comments
Integrating the camera driver into MicroPython. Programming the esp32 cam processor The esp32 cam does not come with a serial USB interface as many other ESP32 processor...
Devices needed The Raspberry Pi The Raspberry Pi features SoC: Broadcom BCM2837 CPU: Quad Core ARM Cortex A53, 1.2 GHz RAM: 1GB LPDDR2 (900 MHz)...
Tutorial Description Abstract While most of the tutorials of the 2018 AFNOG conference deal with Internet related problems this particular tutorial on IoT (Internet...
The DS18B20 1 wire temperature sensor The DS18B20 is a high precision temperature sensor using Maxim`s 1 wire protocol. Again a driver is already available in the...
The DHT11 temperature and humidity sensor The DHT11 is a temperature and humidity sensor using its own private protocol. Fortunately a driver is again available in...
A Custom MicroPython binary Introduction We have already seen how to create a custom MicroPython binary when we integrated all the modules needed for the WEB server...
Creating the virtual world The virtual world we want to create will show the ultra sonic sensor and the paper we hold in front of it. The paper color in the virtual...
Communicating over MQTT MQTT, the Message Queuing Telemetry Transport protocol is the communication protocol of choice in many IoT applications. It uses a broker receiving...
Combining the Real World with the Virtual World Before we have seen how to read out the color sensor and and how to determine the distance between the colored paper...
The Color Sensor Color Sensor Types The color sensor is used to show the paper moving in front of the distance sensor in the right color. Just like in case of the...
Connecting to Cayenne A Micropython class connecting to WiFi and subscribing to the myDevices MQTT broker Since every sensor node needs to first connect to WiFi and...
The Buzzer shield The Hardware The buzzer shield implements a passive buzzer with frequencies up to 1 kHz 3 kHz. By default it uses data line D5 corresponding to...
The BMP180 barometric pressure and temperature sensor This board uses a Bosch BMP180 I2C barometric pressure and temperature sensor. The driver version of the BMP...
Accessing sensors and actuators Session 2 of the AFNOG tutorialon IoT sensorsUli Raich The sensors and actuators For our experiment we need 3 different devices:...
Accessing the Raspberry Pi from the PC In order to access the Raspberry Pi the easiest method is ssh. On a Linux Laptop everything is already installed for you and...
Accessing Micro Python on the IoT Node Introduction Once micro Python is running on the node we must be able to upload Python programs on the node and execute them...
Abstract IoT, the Internet of things has become kind of a buzz word. Everybody talks about it but there are few people who really know what is hidden behind the acronym...
A WEB server on the Microcontroller with MicroPython Introduction In the 2019 AFNOG course we have seen how to connect to sensors and actuators through Cayenne and...
The Internet Of Things (IoT), MQTT and Cayenne Introduction During the AIS conference 2019 in Kampala, Uganda, a 2 day workshop on IoT is held. IoT nodes consist...
Tutorial Description Abstract While most of the tutorials of the 2018 AFNOG conference deal with Internet related problems this particular tutorial on IoT (Internet...
AFNOG workshop during the AIS conference 2018 in Dakar in the workshop on IoT sensors during the AIS conference 2018 we intended to show how a typical IoT node accesses...
AFNOG 2019 slides Workshop slides Setting up an IoT Workshop exercises The hands on exercises Talk What is IoT? Comments

«Previous   1  2  3   Next»

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map

Topic revision: r1 - 2006-11-15 - TWikiContributor
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback