AWEBServer < IoT_Course_English

---+ A WEB Server and the HTTP Protocol
---++ Exercise 1: Write a Hello World WEB Server

Write a simplistic WEB server, serving a single WEB page. This server is very similar to the TCP server written in the [WiFi]] exercises. It now waits for a connection on port 80, reads a request from the browser, and sends a simple HTML page as its response. Interpretation of the incoming request is not necessary because the server is only capable of sending a single page anyway.

Print the incoming HTTP request, which will look similar to this:

<img alt="http.png" height="602" src="%ATTACHURL%/http.png" title="http.png" width="737" />

The request starts with "Content Get / HTTP/1.1"

The page seen by the browser will look similar to this:

<img alt="helloWorldWebServerV1.png" height="210" src="%ATTACHURL%/helloWorldWebServerV1.png" title="helloWorldWebServerV1.png" width="925" />
---++ Exercise 2: picoweb

Download picoweb and its example programms from gitthub: [[https://github.com/pfalcon/picoweb][https://github.com/pfalcon/picoweb.]]

You can find several tutorials on picoweb on the Internet:
   * https://www.dfrobot.com/blog-742.html
   * [[https://techtutorialsx.com/2017/09/01/esp32-micropythhttps://techtutorialsx.com/2017/09/01/esp32-micropython-http-webserver-with-picowebon-http-webserver-with-picoweb][https://techtutorialsx.com/2017/09/01/esp32-micropython-http-webserver-with-picoweb]]
You may neglect the chapters on picoweb installation because the !MicroPython firmware already contains a copy of picoweb:

<img alt="picowebInstallation.png" height="109" src="%ATTACHURL%/picowebInstallation.png" title="picowebInstallation.png" width="737" />

For more information on the use of picoweb you will have to study the examples distributed with the github repository or picoweb itself. The examples demonstrate most of picoweb's features. 

Re-write the example from exercise 1 using the picoweb framework. Now the HTML page is separated from the code and must be stored in a separate file. Upload this file to the ESP32 into a folder named _html._ Create the folder if it does not exist yet. You may also compress the HTML file with gzip and transfer the compressed file to the browser thus limiting the size of the message that must be sent.
---++ Exercise 3: Provide Measurement Data on the WEB Page

Modify the WEB server to provide temperature and humidity measured with the SHT30. The easiest way to accomplish this is static text like in the Hello World HTML page into which the measurements can be inserted. This can be done with _[[https://github.com/pfalcon/utemplate][utemplates]]_, which are provided by _[[https://github.com/pfalcon/picoweb][picoweb]]_. Have a look in the _utemplates_ README.MD and in the examples directory of picoweb to understand how this is implemented.

This is how your WEB site for SHT30 measurements might look like (screen dump of the solution script):

<img alt="sht30WebSite.png" height="254" src="%ATTACHURL%/sht30WebSite.png" title="sht30WebSite.png" width="587" />
---++ Exercise 4: Ajax

The above exercise has a major flaw: For each measurement you must reload the entire page. It would be much nicer it the WEB page could be updated whenever a new is requested.

-- %USERSIG{UliRaich - 2020-05-27}%

---++ Comments

%COMMENT%

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who
png	helloWorldWebServerV1.png	r1	manage	38.8 K	2022-10-03 - 08:22	UliRaich
png	http.png	r1	manage	105.1 K	2022-10-03 - 08:17	UliRaich
png	picowebInstallation.png	r1	manage	13.3 K	2022-10-03 - 09:57	UliRaich
png	sht30WebSite.png	r1	manage	15.5 K	2020-05-27 - 19:53	UliRaich

This topic: IoT_Course_English > WebHome > Exercises > AWEBServer
Topic revision: r7 - 2022-10-03 - UliRaich