The driver for BMA423 Triaxial Acceleration Sensor
I use the bma423 API from Bosch with Daniel Thomson's upy interface:
https://github.com/daniel-thompson/bma42x-upy
The BMA42x driver uses the
- debug(on_off): switch debugging on / off
- feature_enable
- get_offset_comp
- get_temperature
- init (called when the object is created)
- map_interrupt
- read_accel_xyz
- read_int_status
- set accel_config
- reset_step_counter
- set accel_enable
- set_any_mot_config
- set_no_mot_config
- set_command_reg
- set_offset_comp
- step_detector_enable
- step_counter_output
- step_counter_set_watermark
- write_config_file
--
Uli Raich - 2021-01-27
Comments
This topic: IoT_Course_English
> WebHome >
TheT-watch2020Hardware > BMA423Driver
Topic revision: r2 - 2021-01-27 - UliRaich