---+ Le module ESP32 cam ---++ Introduction Le module ESP32 cam standard ne possède pas de connecteur micro USB pour la communication série. On doit alors passer par un convertisseur USB - série connecté sur les lignes !U0TXD et !U0RXD. | <img alt="ESP32-CAM-pinout-1.webp" height="235" src="%ATTACHURL%/ESP32-CAM-pinout-1.webp" title="ESP32-CAM-pinout-1.webp" width="547" /> | <img alt="ft232h.png" height="539" src="%ATTACHURL%/ft232h.png" title="ft232h.png" width="871" /> | | ESP32 CAM | CJMCU !FT232H | Un tel convertisseur est le module CJMCU !FT232H, qui peut aussi être employé pour le débogage JTAG ou comme interface PC - SPI ou PC - !I2C. En mode série les connexions se font comme suit (voir chapitre 3.2 de la fiche technique du [[https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232H.pdf][CJMCU FT232H)]] : | ESP32 CAM | CJMCU !FT232H | | GND | Power GND | | !U0TXD | AD1: Rx | | !U0RXD | AD0: Tx | | GND | AD GND | -- %USERSIG{UliRaich - 2021-06-08}% ---++ Comments %COMMENT%
Attachments
Attachments
Topic attachments
I
Attachment
History
Action
Size
Date
Who
Comment
webp
ESP32-CAM-pinout-1.webp
r1
manage
19.1 K
2021-06-08 - 12:51
UliRaich
png
ft232h.png
r1
manage
171.3 K
2021-06-08 - 13:34
UliRaich
This topic: IoT_Course_French
>
WebHome
>
ESP32Cam
Topic revision: r1 - 2021-06-08 - UliRaich
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback