Difference: TheHardware (13 vs. 14)

Revision 142020-11-28 - UliRaich

Line: 1 to 1

META TOPICPARENT	name="WebHome"

The Hardware

The CPU card

Line: 93 to 93

Buzzer shield	D5 D6 D7 D8	GPIO 14 (default) GPIO 12 GPIO 13 GPIO15	GPIO 18 (default) GPIO 19 GPIO 23 GPIO 5	passive buzzer
BMP180 shield	D1 D2	GPIO 5 I2C SCL GPIO 4 I2C SDA	GPIO 22 I2C SCL GPIO 21 I2C SDA	I2C barometric pressure sensor and temperature sensor
DHT11 shield	D4 patched to D1	GPIO 2 patched to GPIO 5	GPIO 16 patched to GPIO 22	temperature and humidity sensor

Changed:

<
<

OLED shield	D1 D2	GPIO 5 I2C SCL GPIO 4 I2C SDA	GPIO 22 I2C SCL GPIO 21 I2C SDA	64x48 pixel display with SSD1036 I2C controller
TFT shield	D0 D8	GPIO 16 CS GPIO 15 DC	GPIO 26 CS GPIO 5 DC	128x128 pixel display with ST7735 SPI controller

>
>

64x48 pixel OLED shield	D1 D2	GPIO 5 I2C SCL GPIO 4 I2C SDA	GPIO 22 I2C SCL GPIO 21 I2C SDA	64x48 pixel display with SSD1036 I2C controller
128x128 pixel TFT shield	D0 D8	GPIO 16 CS GPIO 15 DC	GPIO 26 CS GPIO 5 DC	128x128 pixel display with ST7735 SPI controller
320 x 240 pixel TFT screen and touch screen	D8 D7 D6 D5 D0 D3		GPIO 5 (TFT_DC) GPIO 23 (MOSI) GPIO 19 (MISO) GPIO 18 (SCK) GPIO 26 (TFT_CS) GPIO 25 (TS_CS)	320x240 pixel display with ili9341 controller and xpt2046 touch screen controller GPIO 25 must be jumpered to GPIO 17 on the WROVER board

DS18B20 shield	D2	GPIO 4	GPIO 21	1-wire digital temperature sensor
SHT30 shield	D1 D2	GPIO 5 I2C SCL GPIO 4 I2C SDA	GPIO 22 I2C SCL GPIO 21 I2C SDA	I2C temperature and humidity sensor
Motor shield	D1 D2	GPIO 5 I2C SCL GPIO 4 I2C SDA	GPIO 22 I2C SCL GPIO 21 I2C SDA	Controlling DC Motors

View topic | History: r24 < r23 < r22 < r21 | More topic actions...

Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback