Tags:
create new tag
view all tags
Searched: ^L

Results from Embedded_Systems web retrieved at 19:20 (GMT)

Exercise 11: The LCD Display Goal: The main goal of this exercise is to prepare for an exercises on Analogue to Digital Conversion (ADC). In the ADC exercise we will...
Controlling the Arduino LED via Bluetooth First I connected up the HC 06 with the Arduino. The obvious way to do this is to use the Rx and Tx pins on the Arduino and...
Digital to Analogue Conversion Digital to Analogue Conversion: the mcp4275 Lecture 10Uli RaichUCC semester 2017/2018 Analogue versus digital Up to now we only treated...
The 2 Line LCD Display and its HD44780 Controller The 2 Line LCD Display and its HD44780 Controller Uli Raich UCC semester 2017/2018 Why a simple 2 line display...
Analogue to Digital Conversion Analogue to Digital Conversion Lecture 12 Uli Raich UCC semester 2017/2017 Analogue to Digital Conversion Printed Circuit Boards In...
Course on Embedded Systems, Introduction Held at the University of Cape Coast Winter Semester 2017 Lecture 1Uli Raich (uli.raich #64;cern.ch) Introduction What should...
The Linux Operating System Lecture 2 Uli Raich First Semester 2017/2018 Starting the Linux System This is how the screen may loop like after some programs have been...
A bit of C programming Lecture 3 Uli Raich First Semester 2017/2018 Programming Languages To make a language a programming language it needs to implement: Assignments...
Development Tools: Editor, Compiler, Linker, Debugger, Make Uli Raich First Semester 2017/2018 The development cycle The first and most important part in the development...
Files, Pipes, Sockets Programming File I/O, creating new processes and intercommunicate between processes through pipes and network programming using sockets is probably...
The Raspberry Pi and how to bring it to life Lecture 6Uli RaichUCC semester 2017/2018 A first glimpse There are several versions of Raspberry Pis available on the...
Accessing the Real World Lecture 7 Uli Raich UCC semester 2017/2018 Access libraries As we have already seen, the Raspberry Pi flat cable connector and the cobbler...
DHT11 Temperature and Humidity Sensor Lecture 8 Uli Raich UCC semester 2017/2018 A single GPIO pin We have seen how we can drive an LED from a single GPIO pin programmed...
Stepping Motors Lecture 9 Uli Raich UCC semester 2017/2018 The 27BJY 48 stepper motor and its ULN 2803 driver module A lecture on youtube There is an excellent...
Lecture Slides This page contains all the lecture slides: For more information please contact: uli.raich #64;gmail.com Lecture 1: Introduction Lecture 2: The...
LEDs 5 out of the 37 sensors are some sort of LEDS: First we have the standard LEDs (not part of the sensor kit) As you can see from the photo LEDs...
Exercises 5: First Exercise on Hardware: LEDs Goal: Now that we know how to program the Raspberry Pi we will start to setup our first electronic circuits, albeit...
Measuring Light Intensity with a Photo Resistor and a Capacitor Goal: A photo resistor is a device whose resistivity decreases with increasing intensity of light...
Linux Basics What to do after installing Ubuntu Ubuntu has become a very suitable Operating System for building embedded systems. But immediately after installing...
Exercises 1: Discovering Linux Goal: Today...
Number of topics: 20

Topic revision: r18 - 2019-01-07 - UliRaich
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback