Tags:
create new tag
view all tags

Recent Changes in IoT_Course_English Web retrieved at 09:29 (GMT)

The Virtual World Project Article text. Comments
Magnetometer and Compass Introduction Magnetometers measure magnetic field. The electronic devices available are very sensitive, and can measure fields down to the...
The Hardware The CPU card The ESP8266 CPU card has the following pinouts: There are two different ESP32 CPU cards available for the WeMos D1 mini bus. The first card...
Moisture sensors Different types of sensors There are two different types of moisture sensors: resistive sensors, measuring the resistance between two electrodes...
TCS3200 Color Sensor Introduction The TCS3200 color sensor comes on PCBs with slightly different layout: The main difference between these modules is that...
The Magic Wand Example Introduction The magic wand example shows how to detect gestures using an accelerometer. Different types of accelerometers are easily available...
The Sharp GP2Y1010AU0F sensor Connections The circuit diagram below is taken from the GP2Y1010AU data sheet. Here is the connection table: GP2Y1010AU0F WeMos...
Exercise 5: The I2C bus and the SHT30 Temperature and Humidity Sensor Introduction While the DHT11 uses a proprietary protocol the SHT30 make use of a standardized...
The SHT30 I2C Temperature and Humidity Sensor Introduction The SHT30 is a temperature and humidity sensor that communicates over the I2C bus. Typical accuracy for...
Exercise 3: Switches Introduction Switches exist in various incarnations. There are the simple mechanical switches: on/off or push button switches but there are also...
The Plantower PMS5003 The PMS5003 uses a serial interface with a baud rate of 9600 Baud. Here are the pin descriptions from the data sheet: The pinout table for the...
The Shinyei PPD42NS sensor This sensor emits a low occupancy time signal where the relative time the signal is in low state is measured. The connections as are follows...
The virtual world example Introduction The virtual world example uses a TCS3200 color sensor and a HC SR04 ultrasonic distance meter. When a colored paper is placed...
The HC SR04 ultrasonic distance meter The emits an ultrasonic sound wave and measures the time it takes to travel to a target and back. Knowing that sound waves travel...
GUI programming with LVGL Introduction Very often, the microcontroller part of an IoT project allows user interaction only though the network connection, e.g. through...
Motor exercises Introduction We have 3 types of motors that are used for different purposes and controlled in different ways: DC motor used in continuous movement...
People Detection Introduction In this example we use a pre trained model to find out if a person is in sight of the camera, installed on our esp32 cam board. Before...
Wake word detection Introduction There are many examples of speech control devices in today`s homes, Amazon`s Alexa being a prominent example. These devices wait...
Course on Internet of Things Exercises Session 1: Introductory remarks: The scripts we are going to develop during this exercise session do not depend on any system...
IoT Course English Web Preferences The following settings are web preferences of the IoT Course English web. These preferences override the site level preferences...

«Previous   1  2  3  4  5  6  7  8  9   Next»

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map

Topic revision: r1 - 2006-11-15 - TWikiContributor
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback