Recent Changes in Embedded_Systems Web retrieved at 05:31 (GMT)
Measuring Light Intensity with a Photo Resistor and a Capacitor Goal: A photo resistor is a device whose resistivity decreases with increasing intensity of light...
Exercises 5: First Exercise on Hardware: LEDs Goal: Now that we know how to program the Raspberry Pi we will start to setup our first electronic circuits, albeit...
LEDs 5 out of the 37 sensors are some sort of LEDS: First we have the standard LEDs (not part of the sensor kit) As you can see from the photo LEDs...
Lecture Slides This page contains all the lecture slides: For more information please contact: uli.raich #64;gmail.com Lecture 1: Introduction Lecture 2: The...
Stepping Motors Lecture 9 Uli Raich UCC semester 2017/2018 The 27BJY 48 stepper motor and its ULN 2803 driver module A lecture on youtube There is an excellent...
Accessing the Real World Lecture 7 Uli Raich UCC semester 2017/2018 Access libraries As we have already seen, the Raspberry Pi flat cable connector and the cobbler...
Files, Pipes, Sockets Programming File I/O, creating new processes and intercommunicate between processes through pipes and network programming using sockets is probably...
Development Tools: Editor, Compiler, Linker, Debugger, Make Uli Raich First Semester 2017/2018 The development cycle The first and most important part in the development...
A bit of C programming Lecture 3 Uli Raich First Semester 2017/2018 Programming Languages To make a language a programming language it needs to implement: Assignments...
The Linux Operating System Lecture 2 Uli Raich First Semester 2017/2018 Starting the Linux System This is how the screen may loop like after some programs have been...
Course on Embedded Systems, Introduction Held at the University of Cape Coast Winter Semester 2017 Lecture 1Uli Raich (uli.raich #64;cern.ch) Introduction What should...
Analogue to Digital Conversion Analogue to Digital Conversion Lecture 12 Uli Raich UCC semester 2017/2017 Analogue to Digital Conversion Printed Circuit Boards In...
The 2 Line LCD Display and its HD44780 Controller The 2 Line LCD Display and its HD44780 Controller Uli Raich UCC semester 2017/2018 Why a simple 2 line display...
Controlling the Arduino LED via Bluetooth First I connected up the HC 06 with the Arduino. The obvious way to do this is to use the Rx and Tx pins on the Arduino and...
Exercise 11: The LCD Display Goal: The main goal of this exercise is to prepare for an exercises on Analogue to Digital Conversion (ADC). In the ADC exercise we will...
The joystick The joystick consists of 2 potentiometers which are read through two ADCs. On the Arduino we use the built in 10 bit ADCs giving us values of 0.....
Title Article text. Comments
Implementing the Arduino toolbox The program structure As you would probably expect, the program will consist of three parts a server running on the Arduino...
Exercise 15: EEPROM and Driver Access Goal: The goal of this exercise is twofold: First we will learn about an EEPROM, a Electrically Erasable Read Only Memory. These...
The I2C bus If you want to know the details on how the I2C bus works, here are the specs. If that is too much, then you might want to have a look at this bus tutorial...
RSS feed, ATOM feed, WebNotify, site changes, site map 
Edit | Attach | Topic revision: r1 - 2006-11-15 - TWikiContributor
Site map
AFNOG web
Create New Topic
Index
Search
Changes
Notifications
Statistics
Preferences
Account 
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback