Recent Changes in Embedded_Systems Web retrieved at 07:06 (GMT)
The Heart Rate Sensor Goal: The heartbeat monitor consists of a simple Infrared LED combined with a photo diode measuring the IR light traversing you finger and arriving...
The Hantek 6022BE Digital Storage Oscilloscope For the course on embedded systems we need an oscilloscope to be able to see certain signals created by micro controller...
The 2 line LCD display. A 2 line LCD display can be used to display simple information. When using an ADC to read voltages it can be used to show the results implementing...
Final Feedback!!! It been a great time working with you. Ever since i took this project, i have a learn a lot especially with the Arduino devices and Bluetooth stuffs...
Exercises 3: Files, Pipes and Sockets Goal: When talking to the sensors during the next exercises we will use a Raspberry Pi to do the readout. Two different libraries...
Exercises in Python One way to develop the course in a new direction is the replacement of the C programming language by Python. You should not be mislead however...
Examination projects on Embedded Systems, Physics class I expect that you solve the problems on your own and you do not copy from your colleagues. For the examination...
The mcp4725 Digital to Analogue Converter Goal: The digital to analogue converter is a device very often used in control applications. Some HV power supplies are...
DC Motor NOTES Servo motors can be connected directly to an arduino .The servo motor is used because it is built in with a motor ,a feedback circuit and a motor drive...
Exercise List Here is a list of exercises to be solved during the course on emdedded systems. First we play on the Linux system installed on the PC, then we write...
Compiling Master Branch Of OpenHantek Getting abreast with Qt has put us through a lot of thinking this few days and truly it has not been easy. Concerning compiling...
Exercises 3: Compilation Tools: Editor, Compiler, Linker, Debugger, Make Goal: This exercise session should get you acquainted with the tools we will use for editing...
Audio Devices The kit contains 4 audio devices: 2 microphones with different size and sensitivity an active and a passive buzzer The microphones are mounted...
Analogue to Digital Conversion (ADC) Goal: Apart from the digital to analogue converter where we created analog signal levels from digital values, we have only handled...
An additional Lecture on C Programming Creating a Signal GeneratorUli RaichCourse on Embedded SystemsUCC semester end 2017 C is too abstract? I was told that you...
Installing Additional Software Quite a bit of additional software on top of the basic Ubuntu system will be needed. First I install using apt get install : emacs...
Voltmeter The 2 line LCD display controlled by a HD44780 LCD controller can be used for a number of small projects. Here we use it to display the voltage drop...
Traffic light simulator The Raspberry Pi (see Raspberry Pi Description ) is the embedded system we use for our course. It can connect to the outside world through...
The AT commands atMode: The serial line is connected to /dev/ttyUSB0you may connect to another port with ./atMode portname, e.g./dev/ttyUSB1Please enter AT command...
Stepping Motor The Raspberry Pi`s GPIO pins can also be used to generate the signals needed for the different phases of a stepping motors. Driving a stepping motor...
RSS feed, ATOM feed, WebNotify, site changes, site map 
Edit | Attach | Topic revision: r1 - 2006-11-15 - TWikiContributor
Site map
AFNOG web
Create New Topic
Index
Search
Changes
Notifications
Statistics
Preferences
Account 
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback